ZV-PA-CF-ONX
X · Nylon & composites · PA-CF
PA-CF Onyx
The reference ZORVA engineering grade. Ships in a resealable dry bag with indicator desiccant.
719.000đ
Out of stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Matte
Diameter
1,75 mm
Print settings
- Nozzle
- 260–290 °C
- Bed
- 80–100 °C
- Chamber
- 50 °C
- Speed
- 40–80 mm/s
- Cooling
- 0–20 %
- Drying
- 70 °C / 8 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,17 g/cm³ISO 1183 · Fiberon™ PA6-CF20 · annealed
- Tensile strength
- 109,3 MPaISO 527 · XY · Fiberon™ PA6-CF20 · annealed
- Impact strength
- 11,0 kJ/m²ISO 179 · notched, XY · Fiberon™ PA6-CF20 · annealed
- Heat deflection (HDT)
- 215 °CHDT 0,45 MPa · Fiberon™ PA6-CF20 · annealed
- Vicat softening
- 219 °CFiberon™ PA6-CF20 · annealed
Benchmarked on published grades: Polymaker Fiberon™ PA6-CF20 · Polymaker · 27/08/2026
PA-CF
Carbon fibre reinforced polyamide: the closest an FDM printer gets to a machined part. Stiff, dimensionally stable, and self-lubricating where it slides.
Best for
- End-use mechanical parts
- Gears, bushings and wear surfaces
- Production tooling and fixtures
Watch out
Hygroscopic to a fault. It will absorb enough water to fail in an afternoon on an open spool.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-PA-CF-ONX
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Matte
- Colour value
- #1C1D22
- Polymer
- Polyamide, carbon and glass reinforced
- Process
- FDM (filament)