X · PLA · PLA Silk đơn sắc
PLA Silk
Single-colour PLA Silk line in 6 glossy colours; Silver represents the line in product listings.
289.000đ
In stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Polylactic acid
PLA
1,75 mm
Colour·Silk Silver
Print settings
- Nozzle
- 205–225 °C
- Bed
- 55–65 °C
- Chamber
- Not required
- Speed
- 50–100 mm/s
- Cooling
- 100 %
- Drying
- 45 °C / 4 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,25 g/cm³ISO 1183 · PolyLite™ Silk
- Tensile strength
- 47,2 MPaISO 527 · XY · PolyLite™ Silk
- Impact strength
- 4,7 kJ/m²ISO 179 · notched, XY · PolyLite™ Silk
- Vicat softening
- 60 °CPolyLite™ Silk
- Heat deflection (HDT)
- 55 °CHDT 0,45 MPa · PolyLite™ Silk
Benchmarked on published grades: Polymaker PolyLite™ Silk · Polymaker · 27/08/2026
PLA Silk đơn sắc
Single-colour PLA Silk — a glossy silk surface that hides layer lines without post-processing. Same mechanical profile as standard PLA, but every print comes out presentation-ready.
Best for
- Display pieces and gifts
- Vases, figurines and photo props
- Design reviews that need a glossy surface
Watch out
Silk additives slightly weaken inter-layer bonding — keep cooling at 100 % and print at moderate speeds so each bead sets before the next one lands.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-PLA-SK-SLV
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Silk
- Colour value
- #C8C8D0
- Polymer
- Polylactic acid
- Process
- FDM (filament)
Also in
More PLA.
PLA Silk Rainbow
PLA Silk Rainbow
One point in the gradient. A print only sees the slice of colour that fits; tall prints read the full arc. The swatch is a representative mid-arc hue, not the only colour on the spool.
PLA Basic
PLA Basic
Basic PLA line, 17 everyday colours, 115,000 VND/spool.
PLA Matte
PLA Matte
PLA Matte line, 8 mineral-filled matte colours, 259,000 VND/spool.