ZV-ASA-CO-AWH
X · ABS & ASA · ASA Core
ASA Core Arctic White
Reflects heat, which matters for sensor housings in the sun.
319.000đ
Out of stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Matte
Diameter
1,75 mm
Other colours in ASA Core
Print settings
- Nozzle
- 250–270 °C
- Bed
- 100–110 °C
- Chamber
- 50–60 °C
- Speed
- 40–80 mm/s
- Cooling
- 0–15 %
- Drying
- 70 °C / 4 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,13 g/cm³ISO 1183 · Polymaker™ ASA
- Tensile strength
- 43,8 MPaISO 527 · XY · Polymaker™ ASA
- Tensile modulus
- 2 379 MPaISO 527 · XY · Polymaker™ ASA
- Elongation at break
- 6,7 %ISO 527 · XY · Polymaker™ ASA
- Bending strength
- 73,4 MPaISO 178 · XY · Polymaker™ ASA
- Heat deflection (HDT)
- 103 °CHDT 0,45 MPa · Polymaker™ ASA
- Impact strength
- 10,3 kJ/m²ISO 179 · notched, XY · Polymaker™ ASA
- Vicat softening
- 105 °CPolymaker™ ASA
Benchmarked on published grades: Polymaker™ ASA · Polymaker · 27/08/2026
ASA Core
ABS performance with the UV problem solved. Parts keep their colour and their impact strength through years of direct sun, which no PLA or PETG grade will do.
Best for
- Outdoor mounts, sensor housings and signage
- Rooftop and marine hardware
- Anything left in a parked car
Watch out
Same warping and ventilation rules as ABS. Do not print it in an open room.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-ASA-CO-AWH
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Matte
- Colour value
- #FBF9F4
- Polymer
- Acrylonitrile butadiene styrene / acrylonitrile styrene acrylate
- Process
- FDM (filament)
Also in
More ABS/ASA.
ABS Core
Graphite
Acetone smoothing turns layer lines into a moulded surface.
ABS Core
Warm White
Paints and primes cleanly for enclosures that get a finish coat.
ASA Core
Slate Grey
Holds colour in direct sun where grey PLA chalks out within a season.
ASA Core
Signal Orange
UV-stable orange for outdoor markers and safety hardware.