ZV-PC-CO-GRA
Cailab · Polycarbonate · PC Core
PC Core Graphite
Structural PC where transparency is irrelevant and cost is not.
549.000đ
Out of stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Gloss
Diameter
1,75 mm
Other colours in PC Core
Print settings
- Nozzle
- 265–300 °C
- Bed
- 100–120 °C
- Chamber
- 50–60 °C
- Speed
- 30–60 mm/s
- Cooling
- 0–10 %
- Drying
- 80 °C / 8 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,19 g/cm³ISO 1183 · PolyLite™ – PolyMax™ PC
- Tensile strength
- 53,4–69,1 MPaISO 527 · XY · PolyMax™ – PolyLite™ PC
- Tensile modulus
- 2 497 MPaISO 527 · XY · PolyLite™ PC
- Elongation at break
- 4,8 %ISO 527 · XY · PolyLite™ PC
- Bending strength
- 106,1 MPaISO 178 · XY · PolyLite™ PC
- Heat deflection (HDT)
- 111–114 °CHDT 0,45 MPa · PolyLite™ – PolyMax™ PC
- Impact strength
- 4,1–21,3 kJ/m²ISO 179 · notched, XY · PolyLite™ – PolyMax™ PC
- Vicat softening
- 117–120 °CPolyMax™ – PolyLite™ PC
Benchmarked on published grades: Polymaker PolyLite™ PC, Polymaker PolyMax™ PC · Polymaker · 27/08/2026
PC Core
Polycarbonate does not compromise: highest impact energy, highest heat deflection, and enough stiffness to carry real load. It asks for a 300 °C hot end and a warm chamber.
Best for
- Machine guards and load-bearing frames
- High-temperature fixtures
- Light housings and lenses
Watch out
Delaminates if you print it too cool. Under 260 °C the layers never properly fuse.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-PC-CO-GRA
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Gloss
- Colour value
- #14151A
- Polymer
- Polycarbonate and PC blends
- Process
- FDM (filament)