ZV-PC-BL-STG
X · Polycarbonate · PC Blend
PC Blend Steel Grey
The sensible first step past ABS, in the palette's technical grey.
499.000đ
Out of stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Matte
Diameter
1,75 mm
Print settings
- Nozzle
- 250–275 °C
- Bed
- 95–110 °C
- Chamber
- 45–55 °C
- Speed
- 40–80 mm/s
- Cooling
- 0–20 %
- Drying
- 75 °C / 6 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,10 g/cm³ISO 1183 · Polymaker PC-ABS
- Tensile strength
- 39,9 MPaISO 527 · XY · Polymaker PC-ABS
- Impact strength
- 25,8 kJ/m²ISO 179 · notched, XY · Polymaker PC-ABS
- Heat deflection (HDT)
- 112 °CHDT 0,45 MPa · Polymaker PC-ABS
- Vicat softening
- 135 °CPolymaker PC-ABS
Benchmarked on published grades: Polymaker PC-ABS · Polymaker · 27/08/2026
PC Blend
Polycarbonate alloyed for printability. It gives up around 15 °C of heat resistance and returns most of PC's difficulty — warping, adhesion and nozzle temperature all drop to ABS territory.
Best for
- First move up from ABS
- Large functional parts
- Tooling that must not warp
Watch out
Still needs an enclosure. It is easier than PC, not easy.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-PC-BL-STG
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Matte
- Colour value
- #77777C
- Polymer
- Polycarbonate and PC blends
- Process
- FDM (filament)