ZV-PETG-20-CLR
X · PETG · PETG 2.0
PETG 2.0 Clear
Strings show worst on a clear part — this is the colour that tells you whether the new formula earns its price.
319.000đ
Out of stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Translucent
Diameter
1,75 mm
Other colours in PETG 2.0
Print settings
- Nozzle
- 230–240 °C · up to 270 °C at speed
- Bed
- 70–80 °C
- Chamber
- Not required
- Speed
- 50–200 mm/s
- Cooling
- 40–80 %
- Drying
- 60–65 °C / 6 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,22 g/cm³ISO 1183 · SUNLU PETG2.0
- Tensile strength
- 43 ± 10 MPaISO 527 · XY · SUNLU PETG2.0
- Elongation at break
- 12 ± 5 %ISO 527 · XY · SUNLU PETG2.0
- Bending strength
- 70 ± 10 MPaISO 178 · XY · SUNLU PETG2.0
- Flexural modulus
- 1 900 ± 300 MPaISO 178 · XY · SUNLU PETG2.0
- Heat deflection (HDT)
- 71 ± 4 °CHDT 0,45 MPa · SUNLU PETG2.0
- Impact strength
- 4 ± 2 kJ/m²ISO 180 Izod · notched, XY · SUNLU PETG2.0
- Shore hardness
- 80DISO 868 · SUNLU PETG2.0
Benchmarked on published grades: SUNLU PETG2.0 · SUNLU · 03/10/2026
PETG 2.0
PETG reformulated to string less and run faster: up to 200 mm/s with the nozzle pushed to 240–270 °C. “2.0” is a trade name, not a standard — what actually changed is in the table below.
Best for
- PETG parts on a fast CoreXY machine
- Everyday boxes, trays and brackets
- Parts with many travel moves, where strings show
Watch out
Less stringing does not mean moisture stops mattering. The maker still specifies drying at 60–65 °C — a wet spool strings like any PETG.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-PETG-20-CLR
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Translucent
- Colour value
- #E8EEF0
- Polymer
- Glycol-modified polyethylene terephthalate
- Process
- FDM (filament)
Also in
More PETG.
PETG Core
Natural
Light passes through — useful for level windows and diffusers.
PETG Core
Steel Grey
The technical grey from the ZORVA palette. Hides scuffs on shop parts.
PETG Core
Signal Orange
For guards, handles and anything that should be obvious in a machine.
PETG Core
Graphite
Standard housing colour. Takes a vapour-free polish with fine abrasive.