PETG Core
Signal Orange
- Nozzle
- 235–250 °C
- Bed
- 75–85 °C
- Chamber
- Optional
- Speed
- 40–90 mm/s
- Cooling
- 40–60 %
- Drying
- 65 °C / 6 h
- Batch
- issued per lot at dispatch
ZV-PETG-CO-SOR · scan / learn / make
ZV-PETG-CO-SOR
PETG · PETG Core
PETG CoreSignal Orange
For guards, handles and anything that should be obvious in a machine.
On request
for pricing and minimum order
1 000 g · Gloss
Diameter
1,75 mm
Other colours in PETG Core
Print settings
- Nozzle
- 235–250 °C
- Bed
- 75–85 °C
- Chamber
- Optional
- Speed
- 40–90 mm/s
- Cooling
- 40–60 %
- Drying
- 65 °C / 6 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,24–1,25 g/cm³ISO 1183 · PolyMax™ – PolyLite™ PETG
- Tensile strength
- 37,9–50,8 MPaISO 527 · XY · PolyMax™ – PolyLite™ PETG
- Tensile modulus
- 2 117 MPaISO 527 · XY · PolyLite™ PETG
- Elongation at break
- 8,4 %ISO 527 · XY · PolyLite™ PETG
- Bending strength
- 69,6 MPaISO 178 · XY · PolyLite™ PETG
- Heat deflection (HDT)
- 76–78 °CHDT 0,45 MPa · PolyMax™ – PolyLite™ PETG
- Impact strength
- 2,6–11,6 kJ/m²ISO 179 · notched, XY · PolyLite™ – PolyMax™ PETG
- Vicat softening
- 82–84 °CPolyMax™ – PolyLite™ PETG
Benchmarked on published grades: Polymaker PolyLite™ PETG, Polymaker PolyMax™ PETG · Polymaker · 27/08/2026
PETG Core
The all-round shop material. It bends before it breaks, ignores water, and survives a workshop floor. Slow it down and it prints as cleanly as PLA.
Best for
- Brackets and mounts
- Sealed housings and water contact
- Parts that get dropped
Watch out
Sticks to smooth PEI hard enough to pull chips out. Use a textured plate or glue as a release layer.
Dry storage
Signal Orange · #ff552e
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Passport
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
PETG Core
- Code
- ZV-PETG-CO-SOR
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Gloss
- Colour value
- #FF552E
- Polymer
- Glycol-modified polyethylene terephthalate
- Process
- FDM (filament)
Also in
More PETG.
PETG Core
Natural
Light passes through — useful for level windows and diffusers.
TranslucentOn request
PETG Core
Steel Grey
The technical grey from the ZORVA palette. Hides scuffs on shop parts.
GlossOn request
PETG Core
Graphite
Standard housing colour. Takes a vapour-free polish with fine abrasive.
GlossOn request
PETG-CF
Onyx
Matte straight off the plate. Fibre also cuts stringing to almost nothing.
MatteOn request