PETG-CF
Onyx
- Nozzle
- 240–260 °C
- Bed
- 75–85 °C
- Chamber
- Optional
- Speed
- 40–80 mm/s
- Cooling
- 30–50 %
- Drying
- 70 °C / 8 h
- Batch
- issued per lot at dispatch
ZV-PETG-CF-ONX · scan / learn / make
ZV-PETG-CF-ONX
PETG · PETG-CF
PETG-CFOnyx
Matte straight off the plate. Fibre also cuts stringing to almost nothing.
On request
for pricing and minimum order
1 000 g · Matte
Diameter
1,75 mm
Print settings
- Nozzle
- 240–260 °C
- Bed
- 75–85 °C
- Chamber
- Optional
- Speed
- 40–80 mm/s
- Cooling
- 30–50 %
- Drying
- 70 °C / 8 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,30 g/cm³ISO 1183 · Fiberon™ PETG-rCF08
- Tensile strength
- 59,8 MPaISO 527 · XY · Fiberon™ PETG-rCF08
- Impact strength
- 4,0 kJ/m²ISO 179 · notched, XY · Fiberon™ PETG-rCF08
- Heat deflection (HDT)
- 68,6 °CHDT 0,45 MPa · Fiberon™ PETG-rCF08
- Vicat softening
- 81,6 °CFiberon™ PETG-rCF08
Benchmarked on published grades: Polymaker Fiberon™ PETG-rCF08 · Polymaker · 27/08/2026
PETG-CF
PETG with carbon fibre: the stringing problem largely disappears, the stiffness climbs, and the finish comes off the plate matte and even.
Best for
- Structural brackets
- Tooling that sees moisture
- Automotive interior fixtures
Watch out
Fibre lowers elongation from 18 % to around 6 %. Do not use it for living hinges.
Hardened nozzle 0.4 mm+Dry storage
Onyx · #1a1b20
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Passport
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
PETG-CF
- Code
- ZV-PETG-CF-ONX
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Matte
- Colour value
- #1A1B20
- Polymer
- Glycol-modified polyethylene terephthalate
- Process
- FDM (filament)
Also in
More PETG.
PETG Core
Natural
Light passes through — useful for level windows and diffusers.
TranslucentOn request
PETG Core
Steel Grey
The technical grey from the ZORVA palette. Hides scuffs on shop parts.
GlossOn request
PETG Core
Signal Orange
For guards, handles and anything that should be obvious in a machine.
GlossOn request
PETG Core
Graphite
Standard housing colour. Takes a vapour-free polish with fine abrasive.
GlossOn request