PLA High Speed
Molten Orange
- Nozzle
- 215–235 °C
- Bed
- 55–65 °C
- Chamber
- Not required
- Speed
- up to 300 mm/s
- Cooling
- 100 %
- Drying
- 45 °C / 4 h
- Batch
- issued per lot at dispatch
ZV-PLA-HS-MOR · scan / learn / make
ZV-PLA-HS-MOR
PLA · PLA High Speed
PLA High SpeedMolten Orange
High visibility for parts that need to be found on a bench.
On request
for pricing and minimum order
1 000 g · Gloss
Diameter
1,75 mm
Other colours in PLA High Speed
Print settings
- Nozzle
- 215–235 °C
- Bed
- 55–65 °C
- Chamber
- Not required
- Speed
- up to 300 mm/s
- Cooling
- 100 %
- Drying
- 45 °C / 4 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,23 g/cm³ISO 1183 · PolySonic™ PLA
- Tensile strength
- 46,0 MPaISO 527 · XY · PolySonic™ PLA
- Impact strength
- 5,0 kJ/m²ISO 179 · notched, XY · PolySonic™ PLA
- Heat deflection (HDT)
- 53 °CHDT 0,45 MPa · PolySonic™ PLA
- Vicat softening
- 61 °CPolySonic™ PLA
Benchmarked on published grades: Polymaker PolySonic™ PLA · Polymaker · 27/08/2026
PLA High Speed
Reformulated for flow, not for marketing. The melt keeps up past 300 mm/s on a high-flow hot end, so the first draft is done before lunch.
Best for
- Iteration prints and test fits
- Large low-stress parts
- Classroom and workshop volume
Watch out
Fast printing needs cooling to match. Below 100 % fan, overhangs droop.
Dry storageHigh-flow hot end for full speed
Molten Orange · #ff552e
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Passport
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
PLA High Speed
- Code
- ZV-PLA-HS-MOR
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Gloss
- Colour value
- #FF552E
- Polymer
- Polylactic acid
- Process
- FDM (filament)
Also in
More PLA.
PLA Matte
Basalt Grey
Neutral grey reads shape before colour — the default for design review prints.
MatteOn request
PLA Matte
Forest Green
Deep enough to hide layer lines in photographs without going black.
MatteOn request
PLA Matte
Warm Core
The brand paper colour. Off-white, so prints do not photograph blue.
MatteOn request
PLA High Speed
Graphite
Draft prints in the same colour as the final part, so reviews stay honest.
GlossOn request