PLA Matte
Basalt Grey
- Nozzle
- 205–220 °C
- Bed
- 55–65 °C
- Chamber
- Not required
- Speed
- 60–150 mm/s
- Cooling
- 100 %
- Drying
- 45 °C / 4 h
- Batch
- issued per lot at dispatch
ZV-PLA-MT-BAS · scan / learn / make
ZV-PLA-MT-BAS
PLA · PLA Matte
PLA MatteBasalt Grey
Neutral grey reads shape before colour — the default for design review prints.
On request
for pricing and minimum order
1 000 g · Matte
Diameter
1,75 mm / 2,85 mm
Other colours in PLA Matte
Print settings
- Nozzle
- 205–220 °C
- Bed
- 55–65 °C
- Chamber
- Not required
- Speed
- 60–150 mm/s
- Cooling
- 100 %
- Drying
- 45 °C / 4 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,37 g/cm³ISO 1183 · Panchroma™ Matte
- Tensile strength
- 23,2 MPaISO 527 · XY · Panchroma™ Matte
- Impact strength
- 10,0 kJ/m²ISO 179 · notched, XY · Panchroma™ Matte
- Vicat softening
- 62 °CPanchroma™ Matte
- Heat deflection (HDT)
- 53–60 °CHDT 0,45 MPa · PLA range: PolySonic™ – PolyLite™
Benchmarked on published grades: Polymaker Panchroma™ Matte · Polymaker · 27/08/2026
PLA Matte
A mineral-filled matte PLA that hides layer lines without a filler primer. The surface reads as one solid object, which is what you want when the print is the presentation.
Best for
- Design reviews and appearance models
- Enclosures and covers
- Photography props
Watch out
The mineral filler is mildly abrasive — expect a brass nozzle to last months, not years.
Dry storage
Basalt Grey · #5c5c60
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Passport
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
PLA Matte
- Code
- ZV-PLA-MT-BAS
- Net weight
- 1 000 g
- Diameter
- 1,75 mm / 2,85 mm
- Finish
- Matte
- Colour value
- #5C5C60
- Polymer
- Polylactic acid
- Process
- FDM (filament)
Also in
More PLA.
PLA Matte
Forest Green
Deep enough to hide layer lines in photographs without going black.
MatteOn request
PLA Matte
Warm Core
The brand paper colour. Off-white, so prints do not photograph blue.
MatteOn request
PLA High Speed
Molten Orange
High visibility for parts that need to be found on a bench.
GlossOn request
PLA High Speed
Graphite
Draft prints in the same colour as the final part, so reviews stay honest.
GlossOn request