ZV-PETG-MT-CHA
Cailab · PETG · PETG Matte
PETG Matte Charcoal
A matte black that hides fingerprints — for housings and grips that should look moulded.
329.000đ
Out of stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Matte
Diameter
1,75 mm
Other colours in PETG Matte
Print settings
- Nozzle
- 230–255 °C · up to 270 °C at very high speed
- Bed
- 70–80 °C
- Chamber
- Optional
- Speed
- 50–300 mm/s
- Cooling
- 40–80 %
- Drying
- 50–65 °C / 6 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,26 g/cm³ISO 1183 · SUNLU High Speed Matte PETG
- Tensile strength
- 48 MPaISO 527 · XY · SUNLU High Speed Matte PETG
- Elongation at break
- 33 %ISO 527 · XY · SUNLU High Speed Matte PETG
- Bending strength
- 78 MPaISO 178 · XY · SUNLU High Speed Matte PETG
- Flexural modulus
- 2 700 MPaISO 178 · XY · SUNLU High Speed Matte PETG
- Heat deflection (HDT)
- 70 °CHDT 0,45 MPa · SUNLU High Speed Matte PETG
- Impact strength
- 4,1 kJ/m²ISO 180 Izod · notched, XY · SUNLU High Speed Matte PETG
Benchmarked on published grades: SUNLU High Speed Matte PETG · SUNLU · 03/10/2026
PETG Matte
The matte surface of PLA Matte, with the toughness and water resistance of PETG kept intact. Light scatters instead of reflecting, so layer lines and the seam all but disappear.
Best for
- Device housings that must look good and take knocks
- Products for sale, homeware, planters
- Handled parts — fingerprints do not show
Watch out
A matte surface scatters light, so colours are always opaque — there is no clear version. The maker's own datasheet contradicts itself on bed temperature (60–70 °C in the table, 90–100 °C with an enclosure in the notes); test on your own plate.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-PETG-MT-CHA
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Matte
- Colour value
- #2B2C30
- Polymer
- Glycol-modified polyethylene terephthalate
- Process
- FDM (filament)
Also in
More PETG.
PETG Core
Natural
Light passes through — useful for level windows and diffusers.
PETG Core
Steel Grey
The technical grey from the ZORVA palette. Hides scuffs on shop parts.
PETG Core
Signal Orange
For guards, handles and anything that should be obvious in a machine.
PETG Core
Graphite
Standard housing colour. Takes a vapour-free polish with fine abrasive.