ZV-RES-TG-ONX
X · Resin · Tough Resin
Tough Resin Onyx
Dark parts hide support marks, which matters on functional prototypes.
799.000đ
Pre-order
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Matte
Diameter
Bottle
Print settings
- Layer height
- 0,05 mm
- Exposure
- 2.6–3.4 s @ 8K mono
- Bottom layers
- 5 @ 28 s
- Lift speed
- 50 mm/min
- Resin temperature
- 28–32 °C
- Wash
- 4 min IPA
- Cure
- 4 min @ 405 nm
- Volume
- 1 000 g bottle
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Tensile strength
- 40,4 MPaafter Form Cure V2, 12 min / 70 °C
- Tensile modulus
- 1 800 MPaafter Form Cure V2, 12 min / 70 °C
- Elongation at break
- 79 %after Form Cure V2, 12 min / 70 °C
- Flexural modulus
- 1 701 MPaafter Form Cure V2, 12 min / 70 °C
- Impact strength
- 25,0 J/mNotched Izod · after Form Cure V2, 12 min / 70 °C
- Heat deflection (HDT)
- 70 °CHDT 0,45 MPa · after Form Cure V2, 12 min / 70 °C
Benchmarked on published grades: Formlabs Tough 2000 Resin V2 · Formlabs · 27/08/2026
Tough Resin
An ABS-like photopolymer that bends before it shatters. Snap fits survive assembly, threads survive a screwdriver, and dropped parts survive the floor.
Best for
- Functional prototypes with snap fits
- Housings and threaded parts
- Jigs handled by people
Watch out
Longer exposure and cure than model resin. Under-curing shows up as parts that creep out of tolerance.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-RES-TG-ONX
- Net weight
- 1 000 g
- Diameter
- Bottle
- Finish
- Matte
- Colour value
- #20222A
- Polymer
- Photopolymer for MSLA and DLP
- Process
- Resin (MSLA / DLP)
Also in
More Resin.
Precision Resin
Precision Grey
Neutral grey photographs detail better than any other resin colour.
High Temp Resin
Slate
Colour is stable through the 120 °C thermal post-cure.
Castable Resin
Amber
Translucent amber so you can inspect prongs and settings before casting.