ZV-RES-PR-GRY
X · Resin · Precision Resin
Precision Resin Precision Grey
Neutral grey photographs detail better than any other resin colour.
699.000đ
Pre-order
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Matte
Diameter
Bottle
Print settings
- Layer height
- 0,03–0,05 mm
- Exposure
- 1.8–2.6 s @ 8K mono
- Bottom layers
- 4 @ 22 s
- Lift speed
- 60 mm/min
- Resin temperature
- 25–30 °C
- Wash
- 3 min IPA
- Cure
- 2 min @ 405 nm
- Volume
- 1 000 g bottle
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Tensile strength
- 65 MPaASTM D638-10 · post-cured
- Elongation at break
- 6,2 %ASTM D638-10 · post-cured
- Flexural modulus
- 2 200 MPaASTM D790-10 · post-cured
Benchmarked on published grades: Formlabs Clear Resin V4 (Standard) · Formlabs · 27/08/2026
Precision Resin
A low-shrink model resin for parts where the surface is the deliverable. Crisp text, clean 45-degree overhangs and a validated exposure table for common 8K panels.
Best for
- Appearance models and miniatures
- Master patterns for moulding
- Dimensional test fits
Watch out
Model resins are brittle by design. Do not use them for parts under sustained load.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-RES-PR-GRY
- Net weight
- 1 000 g
- Diameter
- Bottle
- Finish
- Matte
- Colour value
- #8D9096
- Polymer
- Photopolymer for MSLA and DLP
- Process
- Resin (MSLA / DLP)
Also in
More Resin.
Tough Resin
Onyx
Dark parts hide support marks, which matters on functional prototypes.
High Temp Resin
Slate
Colour is stable through the 120 °C thermal post-cure.
Castable Resin
Amber
Translucent amber so you can inspect prongs and settings before casting.