Castable Resin
Amber
- Layer height
- 0,025–0,035 mm
- Exposure
- 3.5–4.5 s @ 8K mono
- Bottom layers
- 6 @ 40 s
- Lift speed
- 40 mm/min
- Resin temperature
- 28–32 °C
- Wash
- 2 min IPA, no soak
- Batch
- issued per lot at dispatch
ZV-RES-CA-AMB · scan / learn / make
ZV-RES-CA-AMB
Resin · Castable Resin
Castable ResinAmber
Translucent amber so you can inspect prongs and settings before casting.
On request
for pricing and minimum order
500 g · Translucent
Diameter
Bottle
Print settings
- Layer height
- 0,025–0,035 mm
- Exposure
- 3.5–4.5 s @ 8K mono
- Bottom layers
- 6 @ 40 s
- Lift speed
- 40 mm/min
- Resin temperature
- 28–32 °C
- Wash
- 2 min IPA, no soak
- Cure
- 1 min @ 405 nm
- Volume
- 500 g bottle
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Wax content
- 40 %Castable Wax 40
- Ash residue
- 0,0–0,1 %Castable Wax 40
Benchmarked on published grades: Formlabs Castable Wax 40 · Formlabs · 27/08/2026
Castable Resin
A wax-loaded resin that burns out clean for direct investment casting. Sharp prongs, readable hallmarks, no ash in the flask.
Best for
- Jewellery masters and direct casting
- Dental and lab models
- Fine ornamental work
Watch out
Burnout schedule matters more than print settings. Ramp slowly or the flask cracks.
405 nm MSLA or DLPBurnout furnaceNitrile gloves
Amber · #c98b3a
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Passport
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
Castable Resin
- Code
- ZV-RES-CA-AMB
- Net weight
- 500 g
- Diameter
- Bottle
- Finish
- Translucent
- Colour value
- #C98B3A
- Polymer
- Photopolymer for MSLA and DLP
- Process
- Resin (MSLA / DLP)
Also in
More Resin.
Precision Resin
Precision Grey
Neutral grey photographs detail better than any other resin colour.
MatteOn request
Tough Resin
Onyx
Dark parts hide support marks, which matters on functional prototypes.
MatteOn request
High Temp Resin
Slate
Colour is stable through the 120 °C thermal post-cure.
MatteOn request