ZV-TPU-85-NAT
X · TPU · TPU 85A
TPU 85A Natural
Uncoloured, so it can be dyed — and so you can see the weld between layers.
296.000đ
Out of stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
500 g · Translucent
Diameter
1,75 mm
Print settings
- Nozzle
- 215–230 °C
- Bed
- 35–50 °C
- Chamber
- Not required
- Speed
- 10–20 mm/s
- Cooling
- 60 %
- Drying
- 55 °C / 6 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Shore hardness
- 85 AISO 7619-1
- Density
- 1,12 g/cm³ISO 1183 · PolyFlex™ TPU90 — nearest published grade
- Tensile strength
- 30,1 MPaISO 37 · XY · PolyFlex™ TPU90 — nearest published grade
- Elongation at break
- 592 %ISO 37 · XY · PolyFlex™ TPU90 — nearest published grade
Benchmarked on published grades: Polymaker PolyFlex™ TPU90 · Polymaker · 27/08/2026
TPU 85A
Properly soft. It squashes like rubber and springs back, which is the point — and the reason it needs a short, tight filament path and patience.
Best for
- Soft-touch overmoulds
- Vibration damping mounts
- Wearables and prosthetic liners
Watch out
Buckles in the extruder above roughly 20 mm/s. Bowden setups are not worth attempting.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-TPU-85-NAT
- Net weight
- 500 g
- Diameter
- 1,75 mm
- Finish
- Translucent
- Colour value
- #E8E2D6
- Polymer
- Thermoplastic polyurethane
- Process
- FDM (filament)