ZV-PLA-CF-GRA
Cailab · PLA · PLA-CF
PLA-CF Carbon Graphite
Fibre colour is the part colour. No pigment, no colour shift between batches.
349.000đ
Out of stock
Prices shown are for reference only, not final — we'll announce official pricing once real stock arrives.
1 000 g · Matte
Diameter
1,75 mm
Print settings
- Nozzle
- 215–230 °C
- Bed
- 55–65 °C
- Chamber
- Not required
- Speed
- 40–120 mm/s
- Cooling
- 80 %
- Drying
- 50 °C / 6 h
- Diameter
- 1,75 mm
Print settings are the common starting window for this material class, not measurements. Calibrate with a temperature tower and a flow test on your own machine.
Properties
- Density
- 1,29 g/cm³ISO 1183 · Polymaker PLA-CF
- Tensile strength
- 31,2 MPaISO 527 · XY · Polymaker PLA-CF
- Tensile modulus
- 3 281 MPaISO 527 · XY · Polymaker PLA-CF
- Elongation at break
- 13,2 %ISO 527 · XY · Polymaker PLA-CF
- Impact strength
- 5,5 kJ/m²ISO 179 · notched, XY · Polymaker PLA-CF
- Heat deflection (HDT)
- 54 °CHDT 0,45 MPa · Polymaker PLA-CF
- Vicat softening
- 64 °CPolymaker PLA-CF
Benchmarked on published grades: Polymaker PLA-CF · Polymaker · 27/08/2026
PLA-CF
Chopped carbon fibre in a PLA matrix: stiffer, flatter, and matte black through the whole cross section. It is a stiffness upgrade, not a strength upgrade.
Best for
- Jigs and fixtures that must not flex
- Drone and RC frames
- Camera and tripod hardware
Watch out
Brittle. Carbon fibre raises modulus and lowers impact tolerance at the same time.
The properties on this page are values published in the named manufacturers' data sheets, measured on their grades to the standard printed against each row — not measurements of a ZORVA spool. Use them to compare material classes, not as an acceptance specification.
Specifications
Ships with the spool. Published before you buy.
The same record on the label, on this page and in the box. Batch number included, so a bad print can be traced to a specific run.
- Code
- ZV-PLA-CF-GRA
- Net weight
- 1 000 g
- Diameter
- 1,75 mm
- Finish
- Matte
- Colour value
- #22232A
- Polymer
- Polylactic acid
- Process
- FDM (filament)
Also in
More PLA.
PLA Matte
Basalt Grey
Neutral grey reads shape before colour — the default for design review prints.
PLA Matte
Forest Green
Deep enough to hide layer lines in photographs without going black.
PLA Matte
Warm Core
The brand paper colour. Off-white, so prints do not photograph blue.
PLA High Speed
Molten Orange
High visibility for parts that need to be found on a bench.